Picture above is of Our BOOST/FUEL CONTROL combo for the GM 6.5 Turbo Diesel Engines
(actual item look may vary slightly from picture due to variations in various raw materials)
founder Jim in his quest for added
Boost and reliable power increases from the
GM 6.5TD Turbo Diesel (6.5td
turbodiesel) engines with electronic fuel injection, and has spent countless hours analyzing the vehicle systems
to design a system that accomplished the tasks in a plug and play setup designed
to be very easy install withOUT; cutting or splicing any wires on the existing factory wiring
Such a device to meet our standards had to be easy to install, use, OEM (original equipment manufacturer) compatible, look as stock as possible and be able to be controlled from the comfort and safety of the driver's seat. To make things easier for those with warranty concerns, it had to be easily removable to revert back to 'stock' condition' quickly.
The result is the product shown above, and it is the first and only control of it's kind with all of these custom innovative design features available for the GM 6.5 Turbo Diesel Engines. boost fooler, bleed
boost controller for the 6.5TD with NO cut, NO splice,
"plug & play" design, Documents on these design features have been
filed with the US PATENT OFFICE.
to adjust by turning knob on dash from the comfort of the driver's seat!,
NO NEED TO LIFT HOOD TO ADJUST! Note;
knockoff product sold by disreputable vendors do NOT have the ability to
adjust on the fly, and do NOT have the ability to ADD
FUEL! and those underhood units do not offer the convenience or safety of in cab
Adding Fuel along with Boost is important to attain the proper air/fuel ratio for efficiency and Power.
With our products there is no need to pull over, stop and open the hood to deal with parts near hot engine areas, as
our products allow adjustment from the driver's seat of both Boost and Fuel!
Once set to 'max' it can be
left alone, or adjusted as desired.
Boost can be
raised to levels up to 12 to 15+ psi or more...
In case EGTs
(exhaust gas temperatures)
ever become high, or to reduce
boost if driving at higher altitudes, the
can easily be reduced by just turning the knob, from the safety and comfort of
inside the truck. Computer chips do not offer
Can be used
with most aftermarket performance 'chips' or 'programming' if user already has
one. We have tested with many aftermarket "chips", but we do advise
just the controls be used as there is not much need for those once the
controls are installed.
due to added airflow.
Added economy as engine does not work
as hard to attain a speed, because the engine is operating more efficiently.
NO cutting, splicing or alterations to the factory engine wiring harness
NO replacement of factory parts
NO alteration of factory controls
to even open hood to adjust
Ability to ADD FUEL! Sold WITH the
CONTROL, BOTH products are sold TOGETHER as a combination for Only
$400.00, SPECIAL INTERNET PRICE Only $349.99
so Order NOW! *all prices on web site are subject to change without notice, always email for
accurate price quote and include your full address for proper shipping estimate.
OEM quality and compatible weather resistant connectors.
OEM style wire loom, looks like Factory, made of NYLON, not the cheap stuff that melts. Meets or exceeds OEM standards.
CODED WIRING HARNESS
Very easy to install mostly 'plug & play'.
Only basic tools
required, if any, are to mount control brackets to dash, OR double
backed adhesive tape or Velcro tape can be used.
Original Proprietary Custom design features.
mounted in dash or by using under dash mounting bracket.
Can be easily revert back to
stock, if desired.
harness quickly removes, if desired, for when bringing vehicle in for service
or if you loan the truck out.
specifically for the GM 6.5L EFI Turbo Diesel.
MADE IN THE USA
WE ARE THE
Click here to see our Invention,
Design, Research, Development, Testing and Manufacturing page, and see pictures
of few of our
many products as they come through our production areas.
Now new and improved, with pigtail leads for easier installation or in-dash mounting.
email Sales (AT) A1customs.com for details.
Be sure to READ the FAQ pages and the respective product web pages before emailing any questions, this will save you time, and answer your questions Faster!
Our web site has been written to provide the most information and answer most common questions and many uncommon ones too.
** SPECIAL NOTICE REGARDING PMD CONNECTORS: The New Gray (grey) versions of the Stanadyne PMDs use a New Gray connector that is different than the older black PMD connectors. Previous customers of our BOOST/FUEL CONTROL who do not have the PDC/PMD Remote Package but want one now will need a different connector for the Newer gray PMD fitted for a small cost, or get one of our new adapter harnesses.
NOTICE: Beware of knockoff
or copycat and cheapie products that mount underhood and do not offer the
ability to add fuel with the boost, Also
mechanical boost controls will often result in the computer setting fault
codes and overboost error codes, and those are NOT adjustable from the driver's
seat. Both types are
often peddled on a few unethical forums. Click link below for more info about
WARNING: In regard to misleading information about this product on a certain diesel forum, click here.
NOTE: It is Highly Recommended that the PDC/PMD Remote Package and OPS SAVER be added for RELIABILITY to ANY GM 6.5 Liter Electronic Fuel Injected Diesel engines (even STOCK engines) for RELIABILITY, before (or at the same time) as adding ANY power upgrades.
About: Modifications, Performance Enhancements & Upgrades, and the 'Growing' process, click here for info.
Disclaimer: This product can produce power levels beyond factory parameters, and could likely void your warranty, and may not be legal for use on emission controlled vehicles in some areas, due to these facts buyer accepts all responsibility for it's use, and his/her actions, there is no warranty either expressed or implied as to use of this product. The Magnus-Moss Warranty Act prohibits a dealer or manufacturer from voiding your warranty unless a product is directly responsible for a failure.
"NEXT" PAGE = FUEL CONTROL INFO
Email for current ordering and payment information: Sales (AT) A1customs.com
HOME PAGE a1customs.com
MAIN PAGE for GM 6.5 Diesel
Recommended Products for the GM 6.5 Diesels
The Ultimate PDC/PMD REMOTE PACKAGE
OPSS = OIL PRESSURE SWITCH SAVER
ISS = IGNITION SWITCH SAVER
DASH ADJUSTABLE TURBO BOOST / FUEL CONTROLS
HI-FLOW PERFORMANCE AIR FILTERS, 'LIFETIME' REUSABLE
TUNED 6.5 TURBO DIESEL PERFORMANCE EXHAUST SYSTEMS
WATER MIST INJECTION SYSTEMS also w/ ALCOHOL INJECTION
PROPANE INJECTION SYSTEMS
NITROUS OXIDE INJECTION SYSTEMS
FAQ Ordering, Payment & Shipping
FAQ Products & Technical
Feedback & Testimonials
"NEXT" PAGE = FUEL CONTROL INFO
© All images and text are property
of this website, photographer and/or author and protected by Copyright.
By reading the website, readers understand and agree to all
terms and conditions set forth on
the site and herein and realize that although effort has been made to try to
present accurate information this website, it could contain some errors,
mistakes, opinion, and typos so use any information and with that in mind, if in
doubt, reader should research anything they do not understand or question as
reader is responsible for their own actions. There is no guarantee or
warranty on information on this website or any other it links to and visitors
agree to hold authors, page owners and internet service provider harmless and
free from any liability arising from use of information provided on this website
or any product purchased there from or via email.
disclaimer, terms & conditions.
Notice: This product can produce power levels beyond factory parameters, and could likely void your warranty, and may not be legal for use on emission controlled vehicles in some areas, due to these facts buyer accepts all responsibility for it's use, and his/her actions, there is no warranty either expressed or implied as to use of this product. The Magnus-Moss Warranty Act prohibits a dealer or manufacturer from voiding your warranty unless a product is directly responsible for a failure.