ABOUT THE PDC/PMD REMOTE PACKAGE; PRODUCT'S DESIGN PROCESS:
 

• The picture below shows how OTHER 'coolers' like the FSD coolers and other Heat Syncs or Sinks have NO Air gap (space) between cooler and mounting, such is a not a good design because heat rising up from the hot engine builds up and heats up the heat sink and therefore it cannot properly cool the PMD/FSD.
   If you have heard of high IATs (intake air temperatures) mentioned, then you'll realize that mounting the parts on the hot intake is not the best choice either, especially if there is no air-gap (space) between the manifold and the parts.
  
            Click on image to enlarge
  
  Above image illustrates how heat builds up with so-called competing cooler designs as they have NO 'air-gap', also so much area connected to a hot intake manifold means heat from the engine is reaching the 'cooler'.
• Also a heat sink draws heat, and when mounted to the engine it is drawing egine heat as well as some PMD heat but it's ability to draw heat reaches it saturtion point or maximum very quickly. ANY cooler mounted on the intake in metal to metal contact as all of those we have seen are, will result in the PMD getting too hot!  Be wary of any sites or persons trying to claim otherwise, beside this all being common sense, we have also of course done extensive testing and that confirmed that. Click here for our page about our Design, Manufacturing and Testing.
•  NOTE:  Our PDC/PMD Remote Package is a Remote Mount version that does NOT  mount on the HOT engine but instead mounts on the firewall (recommended location) see further below.
  
            Click on image to enlarge
  
  Above image illustrates the 'air-gap' feature from one of our early designs that keeps the PMD even cooler the air can pass more freely, also there is drastically less area of the cooler connected to a hot intake manifold. However, we decided based on our extensive testing that the best proper way to keep the PMD cool was to get it off and away from the hot engine.
•  NOTE:  Our PDC/PMD Remote Package is a Remote Mount version that does NOT  mount on the HOT engine but instead mounts on the firewall (recommended location) see further below.
   

    Main web site page is at www.a1customs.com

SITE MAP

© All images and text are property of this website, photographer and/or author and protected by Copyright.  Disclaimer:  By reading the website, readers understand and agree to all terms and conditions set forth on the site and herein and realize that although effort has been made to try to present accurate information this website, it could contain some errors, mistakes, opinion, and typos so use any information and with that in mind, if in doubt, reader should research anything they do not understand or question as reader is responsible for their own actions.  There is no guarantee or warranty on information on this website or any other it links to and visitors agree to hold authors, page owners and internet service provider harmless and free from any liability arising from use of information provided on this website or any product purchased there from or via email. Website disclaimer, terms & conditions. The Magnus-Moss Warranty Act prohibits a dealer or manufacturer from voiding your warranty unless a product is directly responsible for a failure.